STATE OF THE ART WORKSHOP

Spanner

We Care for Your Pride and Joy

With our state-of-the-art workshop, matched with our top-flight mechanic, The Lab Cycling Cafe can perform a range of service options on your ride. Our keen attention to detail will keep you investment it top shape and give you the confidence that your cycle will perform at it's best. Come in and discuss your needs.

 

 

SERVICING FOR THE MOST EFFICIENT RESULT

We want you to get the best from your service, so may we recommend the following.

  1. On the day of the service we ask to have your bike in the shop no later than 10am. We will strive to get your bike serviced and finished before the end of that day (depending on availability of spares).
  2. We would ask you to bring your bike in a relatively clean state. Extra cleaning of MTB bikes maybe charged.
  3. You will get a phone call from the mechanic to confirm prices with you before any new parts are fitted.  We ask you to leave a telephone number that you can be reached on.  We will not continue with any work until we have spoken to you first.
  4. Any worn/broken parts will be disposed of unless otherwise requested.
  5. We would ask you to collect your bike within a week of it being serviced or repaired. We reserve the right to charge for storage if bikes are not collected within a reasonable time.

BIKE LAB

WARM UP SERVICE

This is a basic service and recommend for newer bikes or bikes with low use.

  • Frame wiped down and checked for damage/cracks
  • Drive system checked including pedals, chainset, bottom bracket, chain, cassette and both derailleurs.
  • Chain Degreased
  • Seat post removed, cleaned and re-fitted with clamp correctly tightened to recommended torque
  • Brakes checked (**new pads fitted if required)
  • Headset and handlebar assembly checked and correctly tightened to recommended torque
  • Check all inner and outer cables (**replace if required)
  • Lubricate Cables
  • Gears checked/re-aligned
  • Cranks checked and correctly tightened to recommended torque
  • Wheels truedon the bike (minor buckles only)
  • Tyres checked and inflated correctly (replaced if required)
  • All Bolts and contact point checked and tightened to recommended torque

** please note additional parts and labour if required will incur additional charges

$85

 

READY TO ROLL

This is the same as our warm up service with the following additions.

  • Headset removed serviced and refitted
  • Bottom Bracket removed serviced and refitted
  • Drivetrain – cassette and chain checked and degreased on the bike

** please note additional parts and labour if required will incur additional charges

$125

 

TEMPO SERVICE

This is our most common service and would suggest to be done twice a year on bikes that are used regularly.

  • Bike cleaned and degreased before start of service
  • Frame wiped down and checked for damage/cracks
  • Drive system removed including pedals, chainset, bottom bracket, chain and cassette. All cleaned,greased where applicable and refitted or replaced if worn**
  • Seat post removed, cleaned and re-fitted with clamp correctly tightened to recommended torque
  • Brakes checked (new pads fitted if required)
  • Headset removed and handlebar assembly checked and correctly tightened to recommended torque
  • Remove handlebars to grease bolts
  • Check all inner and outer cables (**replace if required)
  • Gears checked/re-aligned
  • Wheels trued off the bike
  • Tyres checked and inflated correctly (**replaced if required)
  • All Bolts and contact point checked and tightened to recommended torque

** please note additional parts if required will incur additional charges

$195

 

 

FULL GAS SERVICE

This is our premier service and would be recommended for a high mileage bike or when you want your bike to have that new bike feeling!

  • Bike cleaned and degreased
  • Bike fully stripped down to the bare frame. Frame wiped down/checked for damage/cracks
  • Complete drive system removed including pedals, chainset, bottom bracket, chain, cassette and both derailleurs. All cleaned, greased where applicable and refitted or replaced if worn**
  • Seat post removed, cleaned and re-fitted and tightened to recommended torque
  • Brakes checked (**new pads fitted if required)
  • Headset removed, cleaned and greased
  • Handlebar assembly checked and tightened to recommended torque
  • Install new Brake Inner & Outer Cables (*inclusive)
  • Install new Mechanical Gear Inner& Outer Cables (*inclusive)
  • Gears checked/re-aligned
  • Replace Handle Bar Tape (*inclusive)
  • Wheels stripped of tyres & inner tubes and trued – Clinchers only (additional cost for tubulars)
  • Wheel hubs stripped down and re-greased
  • Tyres checked and inflated correctly (**replaced if required)
  • All Bolts and contact point checked and tightened to recommended torque

* In-house Brand      **please note brake pads if required will incur additional charges

$375

 

 

Other Services

Apart from our standard services we can do almost anything to a bike that doesn't involve welding or brazing the frame.

$ASK

 

SHIMANO DI2 SOFTWARE UPGRADE

We can update your current Di2 software to the latest update and tune the system to provide new functions.

With this box of tricks we can run a full diagnostic check on your bike, we can speed up the shifting or slow it down, the choice is up to you!  We can swap over the shifting buttons. We can also change the shifters over so the right-hand shifts the front derailleur and more. If you have a satellite shifter we can also change which derailleur it shifts and what button does what. The best feature is the multi-shift function which allows you to move the derailleur across the entirety of the cassette when you hold down the button. It makes a good groupset GREAT!

This new diagnostic will not work with the old analogue Dura-Ace 7900 system, but will work with Dura-Ace 9070 Di2. The cost for this service is $50 and you will need new handlebar tape.
Please contact us to schedule an appointment.

$50